keskiviikko 13. maaliskuuta 2013
perjantai 1. maaliskuuta 2013
A space in the sewers
torstai 28. helmikuuta 2013
Hair doodle
I've been drawing quite a lot lately but it seems I can't keep up with posting them here. I've tried some new media and hoping to get something finished by the weekend. There's also a couple of movie projects I'd like to post about if I get the permission. Anyway here's one doodle from the past few weeks. Prepare for a massive sketch dump post during this weekend!
sunnuntai 20. tammikuuta 2013
mohawk in color
Did some simple colors on this. I'm still painting with touchpad. It's kinda sad cause I actually have a wacom next to my laptop thanks to my friend Maija. The thing is that my computer won't work with it even though we've installed the drivers right and tried practically every trick we could think of. So I'm stuck with this misbehaving machine and a 7x4,5 cm touchpad. It's not a disaster though. I've painted like this many years now and got very used to it. It just pisses me off to know all this could be much easier and faster to do. I guess I'll just have to take the situation as a learning experience.
maanantai 7. tammikuuta 2013
sunnuntai 16. joulukuuta 2012
Making of the Elephant mask
I've shown you the masks I built for Round the Outside music video. I also want to show you how I actually made the elephant mask. It was an interesting piece to work with and a challenge. I knew it was going to be guite big and heavy. It had to be durable and sit tightly on the actors head so that they would be able to dance. Also the trunk had to be made so that it could be hooked to a smoke machine. Jeremias also wanted it to curve upwards so he could easily shoot the smoke coming out. So there was quite a few things that I had to consider when building this. Luckily it turned out great with a bit of testing.
I drew this again in the right scale and cut it out to test the proportions. It's always a bit hard to evaluate how the thing will look like as it gets more three-dimensional. You'll easily make the mask too big when testing with a flat paper model. I had to modify the proportions of the sketch quite a bit. The faceplate is widened and ears were made smaller.
I also made a frame from metal which keeps everything together. My main concern was the trunk because it was going to take on some serious beating in the dance scenes. It had to be attached so that it wouldn't come off even if you swing it around or bumped into something with it.
The base of the trunk is actually rubber tubing from an old waching machine. The eye holes and tusks are made of the same tubing. Tusks are covered with layers of gauze and nylon for a soft edged look.
Tuomas had a specific vision about the markings and I send him different suggestions and examples of what it could look like. We ended up doing these rough brush strokes that form geometric patterns rather than symbols or lettering.
When the style was decided on all I had to do was to paint and attach a couple of starps at back. And here it is ready for wearing.
I cut the base of the mask out of very thick and hard cardboard. This is the kind of stuff that's very hard to cut with scissors or a knife. I had to switch to a small saw at one point. The good thing about cardboard is that its cheap and easier to handle than most materials. It wont be durable though unless you glue it in layers and coat it with something waterproof.
I also made a frame from metal which keeps everything together. My main concern was the trunk because it was going to take on some serious beating in the dance scenes. It had to be attached so that it wouldn't come off even if you swing it around or bumped into something with it.
The base of the trunk is actually rubber tubing from an old waching machine. The eye holes and tusks are made of the same tubing. Tusks are covered with layers of gauze and nylon for a soft edged look.
At this point I nicknamed him Frankenstein's Elephant for all the metal and screws sticking out of his face. Here's the base leather getting glued and the shapes of his face fabricated.
And the trunk curved to it's final position. It could be adjusted later on by bending the metal.
Test assembly with the trunk fabric and ears. Nothing is fixed to their place yet so I could change the positioning of things if needed. It's very important to see all the pieces together before doing anything irreversible.
The trunk and ears were filled with finnfoam, gauze and different types of foam rubber. The trunk fabric was glued to the base. The same thing was done to the ears and shapes on the face.
We're almost done here! Except for the painting and rigging. Designing and painting the markings was the most stressfull stage of making this mask. It's a thing you have to get right at the first try. The worst case scenario was that I'd ruin everything with one bad stroke of a brush. Thats why I did a huge amount of testing with separate pieces of fabric before actually starting to paint.
Tuomas had a specific vision about the markings and I send him different suggestions and examples of what it could look like. We ended up doing these rough brush strokes that form geometric patterns rather than symbols or lettering.
When the style was decided on all I had to do was to paint and attach a couple of starps at back. And here it is ready for wearing.
Tilaa:
Blogitekstit (Atom)



